Tactical Tactical spectacles

RAIDER RAIDERKIT

Product pros

Ballistic spectacles - KIT

  • Anti-scratch , anti-fog coatings
  • Ultra enveloping
  • Ultra high ballistic polycarbonate lens
  • Comfort foam
  • Integrated lateral protection
  • Non slip nose
  • A maximum adaptability : temples or strap

    48 g

Description

With its easy-to-change mono-lens in clear, yellow and smoke versions, the RAIDER ballistic spectacles adapt to all your needs for maximum protection.
Thanks to its dual temples/strap system and the possibility to add foam, you can now chose the version best suited to your needs.

Ballistic Resistance
STANAG 2920

Clear lens : V50 193m/s (695 km/h)
Smoke lens : V50 185 m/s (666 km/h)
Yellow lens : V50 198 m/s (713 km/h)

  • Moreinfo


     

  • Protection : associated risks

    Ballistic Resistance STANAG 2920.

    The ballisitic resistance STANAG defined by NATO ensures compliance with standards ballistic protection for military of Bollé Tactical eyewear. Each lens and each screen suffer the impact of a steel cylinder equivalent to a 0.22 caliber'' of up to more than 275 m / s or 990 km / h.

    The STANAG standards are recognized in all member countries of NATO.

    Mechanical risk - Low energy impact - F

    Low energy impact, resists a 6 mm, 0.86 g ball at 45 m/s

    Mechanical risk- High speed particles at extreme temperatures - T

    The letter T, immediately after the mechanical strength symbol, authorises use for high speed particles at extreme temperatures.

    Risks relating to radiations - UV Protection - EN 170 - (2-1.2, 2C-1.2)

    The protection filters ultraviolet radiation.
    This type of protection is particularly recommended during activities where the source of ultraviolet radiation is predominant, such as mercury vapor lamps, actinic or germicides.
    Levels of application: 2-1.2, 2C-1.2
    Lens color: Clear, blue, yellow or green. Adding the code "C" indicates good color recognition by the holder

    Solar radiations risks: EN 172

    Filter protection for industrial solar radiation.
    Recommended for outdoor work, EN172 norm guarantee a protection of 99.99% from ultra-violet solar radiation.
    Levels of application: 5-3.1 (Polarized) 5-2 (Twilight), 5-1.4 (ESP or CSP), 5/1.1-1.4 (Contrast), 5-2.5 and 5 to 4.1 (smoke)
    Lens colour: depends on the lens technology

  • Lens quality

    1

    optical class symbols 1 : Continuous work

  • Lens technology

    PLATINUM coating

    NEW ANTI-FOG AND ANTI-SCRATCH PLATINUM COATING

    Bollé Safety revolutionizes eye protection with an innovation that meets all international standards, particularly EN166 option K and N.

    CLEARLY INNOVATIVE

    This permanent coating applied on both surfaces makes them highly scratch-resistant (1.4 cd/m²), gives them high resistance to the most aggressive chemicals and slows the appearance of fogging. In any circumstances and at every moment, Platinum provides the highest safety for eyes.

    *EN 166 option K : resistance to surface damage by fine particles. For the lenses to comply, light diffusion after abrasion must be less than 5 candelas per m².

    *EN 166 option N : fog resistance. For the lenses to comply, they must be fog-free for a minimum of 8 seconds at 100°C.

     

  • Coatings

    Coating - Resistance to fogging - N

    The anti-fog coating N is an anti-fog treatment certified.

    Coating - Resistance to surface damage by fine particles - K

    The anti-scratchcoating K provides enhanced scratch-certified coating.

    Platinum

    Bollé Safety revolutionizes eye protection with an innovation that meets all international standards, particularly EN166 option K and N.

    CLEARLY INNOVATIVE

    This permanent coating on both sides of the lens gives them a high resistance to scratching (1.4 cd / m²), to the most aggressive chemicals and delays fogging.
    In all circumstances and at all times the PLATINUM lens innovation guarantees your eyes improved protection.

    *EN 166 option K : resistance to surface damage by fine particles.
    For the lenses to comply, light diffusion after abrasion must be less than 5 candelas per m².

    *EN 166 option N : fog resistance.
    For the lenses to comply, they must be fog-free for a minimum of 8 seconds at 100°C.

     

  • Accessories

    • TAC-CASE

Top page